Artificial grasses are commonly used in residential areas and for sports ground and it is very easy to install. But artificial grass requires the proper installation to look and function as expected. There are many artificial turf installers in India who will help you to install your lawn at your place.
Here are few steps to prepare your lawn for artificial grass installation | Artificial Turf Installers in India
- Verify the Ground Conditions:
The first step in artificial lawn installation is verifying the ground conditions and soil type where you are planning the installation. Determine how well it drains and what time of stone or sand aggregate will require to be added.
- Set up the Ground:
It’s important to set up the area to have a successful installation. Spray weed killer for two weeks in the areas before the installations. This will ensure that all the unwanted plants are dead at the roots. Get rid of the top level of soil, about three inches of grass, to build a new residential lawn room. Use a turf cutter to remove all the unnecessary grass and plants.
Artificial grass does well over ground that does drain well as the turf should be absorbent of water. Install a drainage system if you want to install the grass over a poorly drained area. Doing this will ensure that your artificial turf will last for a long time.
- Add an Artificial Grass base:
Your turf installer will use finely crushed sand, gravel, or rock. Fill in the area with about 3 inches of the materials to improve the drainage. Artificial turf installers may use approximately one cubic yard of material is needed for 100 sq. ft of turf. A stone-layer base might be necessary for areas that don’t drain well. If the turf is supposed to be installed in a playground or in a residential home where children will play, then a shock pad will help to enhance the safety of the area.
- Compact the Ground:
Another vital step is compacting the ground. After that, the ground should be graded and compacted to prepare a durable base area. Your installer may use an electric compaction plate to make sure the area is level. This process ensures that the artificial grass will lay the way it is supposed to without any caving or sloping as time goes on.
- Add a Geotextile Layer:
Even though the area has been filled with sand or rock, it will not prevent the surface’s organic growth. Your installer may use a geotextile layer below and above the layer of rock or sand to prevent unwanted natural plants from growing up into the fake lawn.
Once the land has been prepared, the installer will install your artificial turf. Prepare the area properly to ensure the best outcome after the installation of artificial grass. Contact the expert artificial grass installers for more help and guidance.