Artificial grass installers in Mumbai offer various installation methods of artificial grasses and the methods depend on the site of installation. For example, the installation process on a concrete is different from installing it in an existing lawn. The experienced artificial grass installers will guide you to choose the correct method of installation. So, here is a small guide that will help you to understand the installation.
Artificial Grass Installers in Mumbai Guide Below
- Never Use Sharp Sand as Your laying Course –
To install a typical lawn, you need to remove the existing lawn. The grass installers of Mumbai always recommend granite or limestone as they are long-lasting. But few installers may suggest sharp sand because it is cheaper than granite or limestone dust. There are some reasons for not recommending sharp sand, including –
- Artificial grasses have holes in the latex backing, allowing water to drain through the grass. Over time the sharp sand under the grass will wash away, especially if there is a fall on your artificial grass.
- Sharp sand moves around underfoot, so if the grass receivesan extreme level of football, including from your pet, this will result in dips and holes in your grass where the sharp sand has been used.
- Use Two Layers of Weed Membrane –
This will help you to prevent the growth of weed through your turf. The first layer of weed membrane will prevent weed from growing from the soil and the second layer will protect the latex from grinding against the coarse limestone or granite dust.
The membrane will also prevent the unusual crunching sound while walking on the grass.
- Allow the Grass to Adjust with Its New Home –
The installer may recommend allowing your grass to adjust to the new place before cutting or joining. Basically, you need to unroll the artificial grass and place it where you want to install it and then allow it to settle down. This will help the latex backing to warm up and allow ridges to fall out of the grass.
- Sand Infill –
The installer will suggest you use a silica sand infill for your turf. There are several reasons including –
- It adds weight to your artificial lawn and will help hold the grass in position and prevent ridges or ripples.
- It will improve the aesthetic of the grass by allowing the fibres to remain straight.
- It protects the latex backing and artificial fibres.
- It helps to increase fire resistance
- It enhances the drainage
- Use A Foam Underlay for Your Synthetic Lawn on Concrete and Decking
Artificial grass should never be placed directly on top of the existing grass without a sub-base but you can install artificial grass on the existing hard surface like paving, concrete, and decking. However, your installer may recommend you to use an artificial lawn foam underlay while installing the artificial grass on the paving, decking, or concrete because the foam will cover the unevenness of the surface.